SHARP MZ-2800/MZ-5500/MZ-6500 software

Post Reply
AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu »

hlide wrote: ↑Fri Dec 13, 2019 1:33 pm I believe Vaclav Peroutka has an MZ-6550 and he may be interested. But I don't know if he is registred here.
2 disk images are bootable/working on EmuZ.
Attachments
MZ6550.ZIP
(1.38 MiB) Downloaded 1279 times
msdos.png
msdos.png (10.54 KiB) Viewed 17337 times
cpm86.png
cpm86.png (9.5 KiB) Viewed 17337 times
Top
AnnaWu
Posts: 13
Joined: Thu Nov 15, 2018 9:58 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by AnnaWu »

hlide wrote: ↑Thu Dec 19, 2019 3:38 pm For now, I'm mostly interested in MZ-700, MZ-800, MZ-1500 and X68000 stuff.
For example? Title, Computer?
Top
hlide
Posts: 688
Joined: Thu Jan 25, 2018 9:31 pm

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by hlide »

Well for now, I have some other priorities like a flat moving and no clear ideas.
Top
detlef
Posts: 1
Joined: Wed Jun 19, 2024 8:41 am

Re: SHARP MZ-2800/MZ-5500/MZ-6500 software

Post by detlef »

AnnaWu wrote: ↑Fri Dec 13, 2019 10:52 am Interest on MZ-2800/MZ-5500/MZ-6500 software?
Hi, AnnaWu. Your post is 6 years old. Are you still active her? :|

I got an MZ-6500 a few weeks ago and have been desperately looking for software ever since. MS-DOS, CP/M86 and EOS-16. EOS-16 in particular would be interesting because I wrote some tools for the MZ-6500 in 1985 using the included C compiler.
The device is still untested and the keyboard is missing. But until I know whether the necessary software is available, I won't put the device into operation.

Or if anyone else has a source for software for the MZ-6500... ;)
Top
Post Reply

Return to “Other”